GTO PRO-SL2200B Heavy Duty Second Opener Kit for Dual Gate use w/SL2000B | Linear PRO Access

Details

GTO PRO-SL2200B Heavy Duty Second Opener Kit for Dual Gate use w/SL2000B | Linear PRO Access

GTO / Linear Pro Heavy Duty Dual Slide Gate Opener - PRO-SL2200B

The GTO / Linear Pro Heavy Duty Dual Slide Gate Opener will handle sliding gates weighing up to 1000 pounds and 30 ft. long with an opening of 20 ft. This Slide Gate Operator must be purchased with the SL-2000B for dual functionality. The access-ready package includes a battery backup, radio receiver, entry transmitter, AC transformer, and all the necessary mounting hardware for a standard post mount slide gate installation. It boasts incredible features including solar power compatibility, adjustable obstruction sensing, a two-year warranty, and free shipping.

Package Includes:
• Battery Backup
• Radio Receiver
• Entry Transmitter
• AC Transformer
• Mounting Hardware for Standard Post Mount

Features:
• Full Systems Capable "Add-On Ready" Heavy-Duty Control Board
• Adjustable Obstruction Sensing and Gate Sequencing
• Auto Close Settings (0-120 Seconds)
• Built-In Internal Friction Disc Brack/Lock
• 2 x Easy To Install 4 ft. (1.2 m) Post Mounts Included
• Chain Disconnect For Manual Operation
• Light Professional and Residential Cycle Rated to 100 Cycles Per Day
• Class I, II, III, IV
• 2-Year Manufacturer's Warranty
• System Certified With UL325 5th Edition Safety Standards, ETL Listed

Mechanical Features:
• Operating Temperature: -5°F (-21°C) to 160°F (71°C)°
• Opening Time: 1 ft. (.31 m) Per Second Maximum
• #41 Chain 32 ft. With Master Link
• Fully Compatible Accessory Terminal Block Provides Connections For Safety Loops, Exit Wands, Intercoms, Card Readers, Phone Systems, etc.
• Operation, Diagnostic and Safety Alarms
• Inherent Obstruction Sensing

Electrical Features:
• 12 Volt DC / 7.0 Amp Per Hour, Sealed Rechargeable Battery Included (Battery Charge Is Maintained By 120V AC/60 Hz Input and 18V AC at 40 VA. Output, Transformer Rectified To 14V DC Through Regulator On Control Board)
• Powered by a reliable 12 Volt (1/4 HP Equivalent) DC Motor, Case Hardened Steel Gear Reducer
• Charging Regulated Circuit On Control Board
• “Sleep Draw” 40 mA; “Active Draw” 2 - 9 Amps

Options/Acessories:
• Solar Power Compatible: Add FM123Solar Panel Complete Kit
• Pad Mount: AddSGMP Pad Mounting Plate
• Wireless Vehicle Sensor: Add R4500Vehicle Sensor
• Transmitters: AddRB741 or RB742
• Digital Keypad: AddF310Keypad

*Concrete Mounting Plate Sold Separately